Sandpiper RuppTech Stroke Counter/Batch Control Manual do Utilizador descarregar pdf

Batch Control/Stroke Counter Page 1Batch-sc-rev0611

520-180-000 3/02 Batch Control / Stroke Counter Page 1

A General Overview of this Control System

This control functions in two modes of operation:

 •strokecountermode

 •batchcontrollermode

Thetwomodescanbeoperatedtogetheroralone.

The control receivesasignalfromthediaphragm pump for each

pumpstroke.ItaccomplishesthisthroughaRuppTech® Pulse Output

Interfacemountedonthepump.

RuppTech

Pulse Output Interface - (available ONLY

from Warren Rupp, Inc.)

The Pulse Output Interface mounts on the pump and provides

electrical signals to operate the Control.This creates an electrical

interfacebetweenthecontrolandtheair-poweredpump.

Eachpumpstrokegeneratesasignalthroughaproximityswitch(PNP)

oneitherendoftheairvalve.Astheairvalvereciprocatesbackandforth

duringpumpoperation,targetsoneitherendofthesleeveandspool

settriggertheirrespectiveproximityswitches.Eachtriggersignalsthe

controltoregisteronecountonthestrokecounter/batchcontrolunit.

Thismethodprovidesapositivesignalforeverypumpstroke.

ThePulseOutputInterfacearedesignedforeasyeldinstallation.The

interfacesarealsoavailablefactory-installedonnewpumps.PulseOutput

Interfacescanbepurchasedseparatelyfromthecontrolunitforthose

applicationswhereaprocesscontrollerisalreadypresentinasystem.

This provides a direct interface with the pump and the customer’s

system.

Stroke Counter Mode

Inthismode,thecontrolkeepsarunningtallyofthetotalnumberof

strokesofthepump.Thecontrolsavesthistotaluntiltheaccumulated

countisresetfromthecontrol’skeyboard,orthecounterexceedsthe

10-digitcapacityofthedisplay.Thecountcanbepumpstrokes(onefor

everystroke),orameasureofvolume(i.e.gallons,liters,pounds)to

indicate total volume pumped.The stroke count could also be used

toindicatehowlongthepumphasrun.Thisishelpfulforpreventative

maintenanceschedules,orto accountforthe volumesof uidbeing

transportedorconsumed.The stroke counterfunctionis cumulative,

evenifthepumpisturnedoffandonbysomemeansotherthanthe

control.Anytimethepumpisrunningandthecontrolispowered,itwill

storethetotalcountforfuturereference.

Toviewthetotalizedcount,pushandholdtheTotalCountbuttonon

thecontrolkeyboard.(ToextendthelifeoftheLEDdisplay,thecount

doesnotdisplaycontinuously.)RefertotheProgrammingInstructions

inthismanualtosetthescaleperstrokeorresetthecount.

WarrenRupp,Inc.AUnitofIDEXCorporation•P.O.Box1568•Manseld,OH44901-1568USA•4195248388Fax4195227867www.warrenrupp.com

SERVICE AND OPERATING MANUAL

Stroke Counter/Batch Control

249-006-000 • 100-120/240VAC • 50/60

hertz

NEMA 12 Enclosure

Height 6.1” (15.5cm)

Width 6.54” (16.6cm)

Depth 3.46” (8.8cm)

10-digit LED display

4 push buttons for setup

10A relay output for solenoid valve

2 proximity sensor inputs

2 remote on/off switch inputs

Warren Rupp, Inc. A Unit of IDEX Corporation • P.O. Box 1568 • Manseld, OH 44901-1568 USA • 419 524 8388 Fax 419 522 7867 www.warrenrupp.com

1 2 3 4 5 6 7

Resumo do Conteúdo

Página 1 - Stroke Counter/Batch Control

Batch Control/Stroke Counter Page 1Batch-sc-rev0611520-180-000 3/02 Batch Control / Stroke Counter Page 1A General Overview of this Control Sys

Página 2 - Batch Controller Mode

Batch Control/Stroke Counter Page 2Batch-sc-rev0611520-180-000 3/02

Página 3 - TESTING THE SYSTEM

Batch Control/Stroke Counter Page 3Batch-sc-rev0611520-180-000 3/02 Batch Control / Stroke Counter Page 3Programming for AccuracyTopresetaccu

Página 4 -

Batch Control/Stroke Counter Page 4Batch-sc-rev0611520-180-000 3/02

Página 5 - REFERENCE

Batch Control/Stroke Counter Page 5Batch-sc-rev0611520-180-000 3/02 Batch Control / Stroke Counter Page 5Selecting & Storing a Preset Count

Página 6 - Wiring Diagram

Batch Control/Stroke Counter Page 6Batch-sc-rev0611520-180-000 3/02

Página 7

Batch Control/Stroke Counter Page 7Batch-sc-rev0611520-180-000 3/02 Batch Control / Stroke Counter Page 7Wiring DiagramConnecting the control b

Comentários a estes Manuais

Sem comentários

Sandpiper RuppTech Stroke Counter/Batch Control Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Sandpiper RuppTech Stroke Counter/Batch Control. SANDPIPER RuppTech Stroke Counter/Batch Control User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Sandpiper RuppTech Stroke Counter/Batch Control