Sandpiper S1F Non-Metallic Manual do Utilizador descarregar pdf (Página 17)

s1fnmdl3sm-rev0614

4: AIR END

sandpi p erpump .com

Model S1F Non-Metallic • 14

Note: Stroke Indicator is standard on Spill Containment models

Air Valve Assembly Parts List

Item Part Number Description Qty

1 031-146-000 Air Valve Assembly 1

1-A 031-143-000 Sleeve and Spool Set w/Pins 1

1-B 095-094-559 Body, Air Valve 1

1-C 132-029-552 Bumper 2

1-D 165-096-559 Cap, Mufer 1

1-E 165-098-147 Cap, End 2

1-F 530-028-550 Mufer 1

1-G 560-020-360 O-Ring 8

1-H 675-044-115 Ring, Retaining 2

1-J 710-015-115 Screw, Self-Tapping 4

1-K 210-008-330 Clip, Safety 1

1-M 560-029-360 O-Ring 2

For Pumps with PTFE Coated Hardware:

1 031-146-002 Air Valve Assembly 1

1-J 710-015-308 Screw, Self Tapping 4

(includes all other items on 031-146-000 above)

For Pumps with Alternate Mesh, Sound Dampening

Mufers or Piped Exhaust:

1 031-147-000 Air Valve Assembly 1

(includes all items on 031-146-000 minus 1-D, 1-F, & 1-J)

ATEX Compliant

Air Valve with Stroke Indicator Assembly

Air Distribution Valve Servicing

See repair parts drawing, remove screws.

Step 1: Remove end cap retainer (1-H).

Step 2: Remove end cap (1-E), bumper (1-C).

Step 3: Remove spool part of (1-A) (caution, do not scratch).

Step 4: Press sleeve (1-A) from body (1-B).

Step 5: Inspect O-Ring (1-G) and replace if necessary.

Step 6: Lightly lubricate O-Rings (1-G) on sleeve (1-A).

Step 7: Press sleeve (1-A) into body (1-B).

Step 8: Reassemble in reverse order.

Note: Sleeve and spool (1-A) set is match ground to a specied clearance

sleeve and spools (1-A) cannot be interchanged.

NOTE: CHECK GAP AFTER ASSEMBLY

TO INSURE COMPLETE

INSTALLATION OF RETAINING RING

MODEL SPECIFIC

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Comentários a estes Manuais

Sem comentários

Sandpiper S1F Non-Metallic Manual do Utilizador Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Bombas Sandpiper S1F Non-Metallic